CAT (DILR) PYQs

10 players - P1, P2, ..., P10 - competed in an international javelin throw event. The number (after P) of a player reflects his rank at the beginning of the event, with rank 1 going to the topmost player. There were two phases in the event with the first phase consisting of rounds 1,2, and 3, and the second phase consisting of rounds 4, 5, and 6. A throw is measured in terms of the distance it covers (in meters, up to one decimal point accuracy), only if the throw is a 'valid' one. For an invalid throw, the distance is taken as zero. A player's score at the end of around is the maximum distance of all his throws up to that round. Players are re-ranked after every round based on their current scores. In case of a tie in scores, the player with a prevailing higher rank retains the higher rank. This ranking determines the order in which the players go for their throws in the next round. $$\newline$$ In each of the rounds in the first phase, the players throw in increasing order of their latest rank, i.e. the player ranked 1 at that point throws first, followed by the player ranked 2 at that point and so on. The top six players at the end of the first phase qualify for the second phase. In each of the rounds in the second phase, the players throw in decreasing order of their latest rank i.e. the player ranked 6 at that point throws first, followed by the player ranked 5 at that point and so on. The players ranked 1, 2, and 3 at the end of the sixth round receive gold, silver, and bronze medals respectively. $$\newline$$ All the valid throws of the event were of distinct distances (as per stated measurement accuracy). The tables below show distances (in meters) covered by all valid throws in the first and the third round in the event. $$\newline$$ Distances covered by all the valid throws in the first round $\newline$ <table class="question-table"><thead><tr><th>Player</th><th>Distance (in m)</th></tr></thead><tbody><tr><td>P1</td><td>82.9</td></tr><tr><td>P3</td><td>81.5</td></tr><tr><td>P5</td><td>86.4</td></tr><tr><td>P6</td><td>82.5</td></tr><tr><td>P7</td><td>87.2</td></tr><tr><td>P9</td><td>84.1</td></tr></tbody></table> $$\newline$$ Distances covered by all the valid throws in the third round $\newline$ <table class="question-table"><thead><tr><th>Player</th><th>Distance (in m)</th></tr></thead><tbody><tr><td>P1</td><td>88.6</td></tr><tr><td>P3</td><td>79.0</td></tr><tr><td>P9</td><td>81.4</td></tr></tbody></table> $$\newline$$ The following facts are also known. $$\newline$$ i. Among the throws in the second round, only the last two were valid. Both the throws enabled these players to qualify for the second phase, with one of them qualifying with the least score. None of these players won any medal. $$\newline$$ ii. If a player throws first in a round AND he was also the last (among the players in the current round) to throw in the previous round, then the player is said to get a double. Two players got a double. $$\newline$$ iii. In each round of the second phase, exactly one player improved his score. Each of these improvements was by the same amount. $$\newline$$ iv. The gold and bronze medalists improved their scores in the fifth and the sixth rounds respectively. One medal winner improved his score in the fourth round. $$\newline$$ v. The difference between the final scores of the gold medalist and the silver medalist, as well as the difference between the final scores of the silver medalist and the bronze medalist was $1.0$ m.

10 players - P1, P2, ..., P10 - competed in an international javelin throw event. The number (after P) of a player reflects his rank at the beginning of the event, with rank 1 going to the topmost player. There were two phases in the event with the first phase consisting of rounds 1,2, and 3, and the second phase consisting of rounds 4, 5, and 6. A throw is measured in terms of the distance it covers (in meters, up to one decimal point accuracy), only if the throw is a 'valid' one. For an invalid throw, the distance is taken as zero. A player's score at the end of around is the maximum distance of all his throws up to that round. Players are re-ranked after every round based on their current scores. In case of a tie in scores, the player with a prevailing higher rank retains the higher rank. This ranking determines the order in which the players go for their throws in the next round. $$\newline$$ In each of the rounds in the first phase, the players throw in increasing order of their latest rank, i.e. the player ranked 1 at that point throws first, followed by the player ranked 2 at that point and so on. The top six players at the end of the first phase qualify for the second phase. In each of the rounds in the second phase, the players throw in decreasing order of their latest rank i.e. the player ranked 6 at that point throws first, followed by the player ranked 5 at that point and so on. The players ranked 1, 2, and 3 at the end of the sixth round receive gold, silver, and bronze medals respectively. $$\newline$$ All the valid throws of the event were of distinct distances (as per stated measurement accuracy). The tables below show distances (in meters) covered by all valid throws in the first and the third round in the event. $$\newline$$ Distances covered by all the valid throws in the first round $\newline$ <table class="question-table"><thead><tr><th>Player</th><th>Distance (in m)</th></tr></thead><tbody><tr><td>P1</td><td>82.9</td></tr><tr><td>P3</td><td>81.5</td></tr><tr><td>P5</td><td>86.4</td></tr><tr><td>P6</td><td>82.5</td></tr><tr><td>P7</td><td>87.2</td></tr><tr><td>P9</td><td>84.1</td></tr></tbody></table> $$\newline$$ Distances covered by all the valid throws in the third round $\newline$ <table class="question-table"><thead><tr><th>Player</th><th>Distance (in m)</th></tr></thead><tbody><tr><td>P1</td><td>88.6</td></tr><tr><td>P3</td><td>79.0</td></tr><tr><td>P9</td><td>81.4</td></tr></tbody></table> $$\newline$$ The following facts are also known. $$\newline$$ i. Among the throws in the second round, only the last two were valid. Both the throws enabled these players to qualify for the second phase, with one of them qualifying with the least score. None of these players won any medal. $$\newline$$ ii. If a player throws first in a round AND he was also the last (among the players in the current round) to throw in the previous round, then the player is said to get a double. Two players got a double. $$\newline$$ iii. In each round of the second phase, exactly one player improved his score. Each of these improvements was by the same amount. $$\newline$$ iv. The gold and bronze medalists improved their scores in the fifth and the sixth rounds respectively. One medal winner improved his score in the fourth round. $$\newline$$ v. The difference between the final scores of the gold medalist and the silver medalist, as well as the difference between the final scores of the silver medalist and the bronze medalist was $1.0$ m.

10 players - P1, P2, ..., P10 - competed in an international javelin throw event. The number (after P) of a player reflects his rank at the beginning of the event, with rank 1 going to the topmost player. There were two phases in the event with the first phase consisting of rounds 1,2, and 3, and the second phase consisting of rounds 4, 5, and 6. A throw is measured in terms of the distance it covers (in meters, up to one decimal point accuracy), only if the throw is a 'valid' one. For an invalid throw, the distance is taken as zero. A player's score at the end of around is the maximum distance of all his throws up to that round. Players are re-ranked after every round based on their current scores. In case of a tie in scores, the player with a prevailing higher rank retains the higher rank. This ranking determines the order in which the players go for their throws in the next round. $$\newline$$ In each of the rounds in the first phase, the players throw in increasing order of their latest rank, i.e. the player ranked 1 at that point throws first, followed by the player ranked 2 at that point and so on. The top six players at the end of the first phase qualify for the second phase. In each of the rounds in the second phase, the players throw in decreasing order of their latest rank i.e. the player ranked 6 at that point throws first, followed by the player ranked 5 at that point and so on. The players ranked 1, 2, and 3 at the end of the sixth round receive gold, silver, and bronze medals respectively. $$\newline$$ All the valid throws of the event were of distinct distances (as per stated measurement accuracy). The tables below show distances (in meters) covered by all valid throws in the first and the third round in the event. $$\newline$$ Distances covered by all the valid throws in the first round $\newline$ <table class="question-table"><thead><tr><th>Player</th><th>Distance (in m)</th></tr></thead><tbody><tr><td>P1</td><td>82.9</td></tr><tr><td>P3</td><td>81.5</td></tr><tr><td>P5</td><td>86.4</td></tr><tr><td>P6</td><td>82.5</td></tr><tr><td>P7</td><td>87.2</td></tr><tr><td>P9</td><td>84.1</td></tr></tbody></table> $$\newline$$ Distances covered by all the valid throws in the third round $\newline$ <table class="question-table"><thead><tr><th>Player</th><th>Distance (in m)</th></tr></thead><tbody><tr><td>P1</td><td>88.6</td></tr><tr><td>P3</td><td>79.0</td></tr><tr><td>P9</td><td>81.4</td></tr></tbody></table> $$\newline$$ The following facts are also known. $$\newline$$ i. Among the throws in the second round, only the last two were valid. Both the throws enabled these players to qualify for the second phase, with one of them qualifying with the least score. None of these players won any medal. $$\newline$$ ii. If a player throws first in a round AND he was also the last (among the players in the current round) to throw in the previous round, then the player is said to get a double. Two players got a double. $$\newline$$ iii. In each round of the second phase, exactly one player improved his score. Each of these improvements was by the same amount. $$\newline$$ iv. The gold and bronze medalists improved their scores in the fifth and the sixth rounds respectively. One medal winner improved his score in the fourth round. $$\newline$$ v. The difference between the final scores of the gold medalist and the silver medalist, as well as the difference between the final scores of the silver medalist and the bronze medalist was $1.0$ m.

10 players - P1, P2, ..., P10 - competed in an international javelin throw event. The number (after P) of a player reflects his rank at the beginning of the event, with rank 1 going to the topmost player. There were two phases in the event with the first phase consisting of rounds 1,2, and 3, and the second phase consisting of rounds 4, 5, and 6. A throw is measured in terms of the distance it covers (in meters, up to one decimal point accuracy), only if the throw is a 'valid' one. For an invalid throw, the distance is taken as zero. A player's score at the end of around is the maximum distance of all his throws up to that round. Players are re-ranked after every round based on their current scores. In case of a tie in scores, the player with a prevailing higher rank retains the higher rank. This ranking determines the order in which the players go for their throws in the next round. $$\newline$$ In each of the rounds in the first phase, the players throw in increasing order of their latest rank, i.e. the player ranked 1 at that point throws first, followed by the player ranked 2 at that point and so on. The top six players at the end of the first phase qualify for the second phase. In each of the rounds in the second phase, the players throw in decreasing order of their latest rank i.e. the player ranked 6 at that point throws first, followed by the player ranked 5 at that point and so on. The players ranked 1, 2, and 3 at the end of the sixth round receive gold, silver, and bronze medals respectively. $$\newline$$ All the valid throws of the event were of distinct distances (as per stated measurement accuracy). The tables below show distances (in meters) covered by all valid throws in the first and the third round in the event. $$\newline$$ Distances covered by all the valid throws in the first round $\newline$ <table class="question-table"><thead><tr><th>Player</th><th>Distance (in m)</th></tr></thead><tbody><tr><td>P1</td><td>82.9</td></tr><tr><td>P3</td><td>81.5</td></tr><tr><td>P5</td><td>86.4</td></tr><tr><td>P6</td><td>82.5</td></tr><tr><td>P7</td><td>87.2</td></tr><tr><td>P9</td><td>84.1</td></tr></tbody></table> $$\newline$$ Distances covered by all the valid throws in the third round $\newline$ <table class="question-table"><thead><tr><th>Player</th><th>Distance (in m)</th></tr></thead><tbody><tr><td>P1</td><td>88.6</td></tr><tr><td>P3</td><td>79.0</td></tr><tr><td>P9</td><td>81.4</td></tr></tbody></table> $$\newline$$ The following facts are also known. $$\newline$$ i. Among the throws in the second round, only the last two were valid. Both the throws enabled these players to qualify for the second phase, with one of them qualifying with the least score. None of these players won any medal. $$\newline$$ ii. If a player throws first in a round AND he was also the last (among the players in the current round) to throw in the previous round, then the player is said to get a double. Two players got a double. $$\newline$$ iii. In each round of the second phase, exactly one player improved his score. Each of these improvements was by the same amount. $$\newline$$ iv. The gold and bronze medalists improved their scores in the fifth and the sixth rounds respectively. One medal winner improved his score in the fourth round. $$\newline$$ v. The difference between the final scores of the gold medalist and the silver medalist, as well as the difference between the final scores of the silver medalist and the bronze medalist was $1.0$ m.

10 players - P1, P2, ..., P10 - competed in an international javelin throw event. The number (after P) of a player reflects his rank at the beginning of the event, with rank 1 going to the topmost player. There were two phases in the event with the first phase consisting of rounds 1,2, and 3, and the second phase consisting of rounds 4, 5, and 6. A throw is measured in terms of the distance it covers (in meters, up to one decimal point accuracy), only if the throw is a 'valid' one. For an invalid throw, the distance is taken as zero. A player's score at the end of around is the maximum distance of all his throws up to that round. Players are re-ranked after every round based on their current scores. In case of a tie in scores, the player with a prevailing higher rank retains the higher rank. This ranking determines the order in which the players go for their throws in the next round. $$\newline$$ In each of the rounds in the first phase, the players throw in increasing order of their latest rank, i.e. the player ranked 1 at that point throws first, followed by the player ranked 2 at that point and so on. The top six players at the end of the first phase qualify for the second phase. In each of the rounds in the second phase, the players throw in decreasing order of their latest rank i.e. the player ranked 6 at that point throws first, followed by the player ranked 5 at that point and so on. The players ranked 1, 2, and 3 at the end of the sixth round receive gold, silver, and bronze medals respectively. $$\newline$$ All the valid throws of the event were of distinct distances (as per stated measurement accuracy). The tables below show distances (in meters) covered by all valid throws in the first and the third round in the event. $$\newline$$ Distances covered by all the valid throws in the first round $\newline$ <table class="question-table"><thead><tr><th>Player</th><th>Distance (in m)</th></tr></thead><tbody><tr><td>P1</td><td>82.9</td></tr><tr><td>P3</td><td>81.5</td></tr><tr><td>P5</td><td>86.4</td></tr><tr><td>P6</td><td>82.5</td></tr><tr><td>P7</td><td>87.2</td></tr><tr><td>P9</td><td>84.1</td></tr></tbody></table> $$\newline$$ Distances covered by all the valid throws in the third round $\newline$ <table class="question-table"><thead><tr><th>Player</th><th>Distance (in m)</th></tr></thead><tbody><tr><td>P1</td><td>88.6</td></tr><tr><td>P3</td><td>79.0</td></tr><tr><td>P9</td><td>81.4</td></tr></tbody></table> $$\newline$$ The following facts are also known. $$\newline$$ i. Among the throws in the second round, only the last two were valid. Both the throws enabled these players to qualify for the second phase, with one of them qualifying with the least score. None of these players won any medal. $$\newline$$ ii. If a player throws first in a round AND he was also the last (among the players in the current round) to throw in the previous round, then the player is said to get a double. Two players got a double. $$\newline$$ iii. In each round of the second phase, exactly one player improved his score. Each of these improvements was by the same amount. $$\newline$$ iv. The gold and bronze medalists improved their scores in the fifth and the sixth rounds respectively. One medal winner improved his score in the fourth round. $$\newline$$ v. The difference between the final scores of the gold medalist and the silver medalist, as well as the difference between the final scores of the silver medalist and the bronze medalist was $1.0$ m.

10 players - P1, P2, ..., P10 - competed in an international javelin throw event. The number (after P) of a player reflects his rank at the beginning of the event, with rank 1 going to the topmost player. There were two phases in the event with the first phase consisting of rounds 1,2, and 3, and the second phase consisting of rounds 4, 5, and 6. A throw is measured in terms of the distance it covers (in meters, up to one decimal point accuracy), only if the throw is a 'valid' one. For an invalid throw, the distance is taken as zero. A player's score at the end of around is the maximum distance of all his throws up to that round. Players are re-ranked after every round based on their current scores. In case of a tie in scores, the player with a prevailing higher rank retains the higher rank. This ranking determines the order in which the players go for their throws in the next round. $$\newline$$ In each of the rounds in the first phase, the players throw in increasing order of their latest rank, i.e. the player ranked 1 at that point throws first, followed by the player ranked 2 at that point and so on. The top six players at the end of the first phase qualify for the second phase. In each of the rounds in the second phase, the players throw in decreasing order of their latest rank i.e. the player ranked 6 at that point throws first, followed by the player ranked 5 at that point and so on. The players ranked 1, 2, and 3 at the end of the sixth round receive gold, silver, and bronze medals respectively. $$\newline$$ All the valid throws of the event were of distinct distances (as per stated measurement accuracy). The tables below show distances (in meters) covered by all valid throws in the first and the third round in the event. $$\newline$$ Distances covered by all the valid throws in the first round $\newline$ <table class="question-table"><thead><tr><th>Player</th><th>Distance (in m)</th></tr></thead><tbody><tr><td>P1</td><td>82.9</td></tr><tr><td>P3</td><td>81.5</td></tr><tr><td>P5</td><td>86.4</td></tr><tr><td>P6</td><td>82.5</td></tr><tr><td>P7</td><td>87.2</td></tr><tr><td>P9</td><td>84.1</td></tr></tbody></table> $$\newline$$ Distances covered by all the valid throws in the third round $\newline$ <table class="question-table"><thead><tr><th>Player</th><th>Distance (in m)</th></tr></thead><tbody><tr><td>P1</td><td>88.6</td></tr><tr><td>P3</td><td>79.0</td></tr><tr><td>P9</td><td>81.4</td></tr></tbody></table> $$\newline$$ The following facts are also known. $$\newline$$ i. Among the throws in the second round, only the last two were valid. Both the throws enabled these players to qualify for the second phase, with one of them qualifying with the least score. None of these players won any medal. $$\newline$$ ii. If a player throws first in a round AND he was also the last (among the players in the current round) to throw in the previous round, then the player is said to get a double. Two players got a double. $$\newline$$ iii. In each round of the second phase, exactly one player improved his score. Each of these improvements was by the same amount. $$\newline$$ iv. The gold and bronze medalists improved their scores in the fifth and the sixth rounds respectively. One medal winner improved his score in the fourth round. $$\newline$$ v. The difference between the final scores of the gold medalist and the silver medalist, as well as the difference between the final scores of the silver medalist and the bronze medalist was $1.0$ m.

Three reviewers Amal, Bimal, and Komal are tasked with selecting questions from a pool of 13 questions (Q01 to Q13). Questions can be created by external "subject matter experts" (SMEs) or by one of the three reviewers. Each of the reviewers either approves or disapproves a question that is shown to them. Their decisions lead to eventual acceptance or rejection of the question in the manner described below. $$\newline$$ If a question is created by an SME, it is reviewed first by Amal, and then by Bimal. If both of them approve the question, then the question is accepted and is not reviewed by Komal. If both disapprove the question, it is rejected and is not reviewed by Komal. If one of them approves the question and the other disapproves it, then the question is reviewed by Komal. Then the question is accepted only if she approves it. $$\newline$$ A question created by one of the reviewers is decided upon by the other two. If a question is created by Amal, then it is first reviewed by Bimal. If Bimal approves the question, then it is accepted. Otherwise, it is reviewed by Komal. The question is then accepted only if Komal approves it. A similar process is followed for questions created by Bimal, whose questions are first reviewed by Komal, and then by Amal only if Komal disapproves it. Questions created by Komal are first reviewed by Amal, and then, if required, by Bimal. $$\newline$$ The following facts are also known. $$\newline$$ <ol> $\newline$ <li>Q02, Q06, Q09, Q11, and Q12 were rejected and the other questions were accepted.</li> $$\newline$$ <li>Amal reviewed only Q02, Q03, Q04, Q06, Q08, Q10, Q11, and Q13.</li> $$\newline$$ <li>Bimal reviewed only Q02, Q04, Q06 through Q09, Q12, and Q13.</li> $$\newline$$ <li>Komal reviewed only Q01 through Q05, Q07, Q08, Q09, Q11, and Q12.</li> $\newline$ </ol>

Three reviewers Amal, Bimal, and Komal are tasked with selecting questions from a pool of 13 questions (Q01 to Q13). Questions can be created by external "subject matter experts" (SMEs) or by one of the three reviewers. Each of the reviewers either approves or disapproves a question that is shown to them. Their decisions lead to eventual acceptance or rejection of the question in the manner described below. $$\newline$$ If a question is created by an SME, it is reviewed first by Amal, and then by Bimal. If both of them approve the question, then the question is accepted and is not reviewed by Komal. If both disapprove the question, it is rejected and is not reviewed by Komal. If one of them approves the question and the other disapproves it, then the question is reviewed by Komal. Then the question is accepted only if she approves it. $$\newline$$ A question created by one of the reviewers is decided upon by the other two. If a question is created by Amal, then it is first reviewed by Bimal. If Bimal approves the question, then it is accepted. Otherwise, it is reviewed by Komal. The question is then accepted only if Komal approves it. A similar process is followed for questions created by Bimal, whose questions are first reviewed by Komal, and then by Amal only if Komal disapproves it. Questions created by Komal are first reviewed by Amal, and then, if required, by Bimal. $$\newline$$ The following facts are also known. $$\newline$$ <ol> $\newline$ <li>Q02, Q06, Q09, Q11, and Q12 were rejected and the other questions were accepted.</li> $$\newline$$ <li>Amal reviewed only Q02, Q03, Q04, Q06, Q08, Q10, Q11, and Q13.</li> $$\newline$$ <li>Bimal reviewed only Q02, Q04, Q06 through Q09, Q12, and Q13.</li> $$\newline$$ <li>Komal reviewed only Q01 through Q05, Q07, Q08, Q09, Q11, and Q12.</li> $\newline$ </ol>

Three reviewers Amal, Bimal, and Komal are tasked with selecting questions from a pool of 13 questions (Q01 to Q13). Questions can be created by external "subject matter experts" (SMEs) or by one of the three reviewers. Each of the reviewers either approves or disapproves a question that is shown to them. Their decisions lead to eventual acceptance or rejection of the question in the manner described below. $$\newline$$ If a question is created by an SME, it is reviewed first by Amal, and then by Bimal. If both of them approve the question, then the question is accepted and is not reviewed by Komal. If both disapprove the question, it is rejected and is not reviewed by Komal. If one of them approves the question and the other disapproves it, then the question is reviewed by Komal. Then the question is accepted only if she approves it. $$\newline$$ A question created by one of the reviewers is decided upon by the other two. If a question is created by Amal, then it is first reviewed by Bimal. If Bimal approves the question, then it is accepted. Otherwise, it is reviewed by Komal. The question is then accepted only if Komal approves it. A similar process is followed for questions created by Bimal, whose questions are first reviewed by Komal, and then by Amal only if Komal disapproves it. Questions created by Komal are first reviewed by Amal, and then, if required, by Bimal. $$\newline$$ The following facts are also known. $$\newline$$ <ol> $\newline$ <li>Q02, Q06, Q09, Q11, and Q12 were rejected and the other questions were accepted.</li> $$\newline$$ <li>Amal reviewed only Q02, Q03, Q04, Q06, Q08, Q10, Q11, and Q13.</li> $$\newline$$ <li>Bimal reviewed only Q02, Q04, Q06 through Q09, Q12, and Q13.</li> $$\newline$$ <li>Komal reviewed only Q01 through Q05, Q07, Q08, Q09, Q11, and Q12.</li> $\newline$ </ol>

Three reviewers Amal, Bimal, and Komal are tasked with selecting questions from a pool of 13 questions (Q01 to Q13). Questions can be created by external "subject matter experts" (SMEs) or by one of the three reviewers. Each of the reviewers either approves or disapproves a question that is shown to them. Their decisions lead to eventual acceptance or rejection of the question in the manner described below. $$\newline$$ If a question is created by an SME, it is reviewed first by Amal, and then by Bimal. If both of them approve the question, then the question is accepted and is not reviewed by Komal. If both disapprove the question, it is rejected and is not reviewed by Komal. If one of them approves the question and the other disapproves it, then the question is reviewed by Komal. Then the question is accepted only if she approves it. $$\newline$$ A question created by one of the reviewers is decided upon by the other two. If a question is created by Amal, then it is first reviewed by Bimal. If Bimal approves the question, then it is accepted. Otherwise, it is reviewed by Komal. The question is then accepted only if Komal approves it. A similar process is followed for questions created by Bimal, whose questions are first reviewed by Komal, and then by Amal only if Komal disapproves it. Questions created by Komal are first reviewed by Amal, and then, if required, by Bimal. $$\newline$$ The following facts are also known. $$\newline$$ <ol> $\newline$ <li>Q02, Q06, Q09, Q11, and Q12 were rejected and the other questions were accepted.</li> $$\newline$$ <li>Amal reviewed only Q02, Q03, Q04, Q06, Q08, Q10, Q11, and Q13.</li> $$\newline$$ <li>Bimal reviewed only Q02, Q04, Q06 through Q09, Q12, and Q13.</li> $$\newline$$ <li>Komal reviewed only Q01 through Q05, Q07, Q08, Q09, Q11, and Q12.</li> $\newline$ </ol>

Three reviewers Amal, Bimal, and Komal are tasked with selecting questions from a pool of 13 questions (Q01 to Q13). Questions can be created by external "subject matter experts" (SMEs) or by one of the three reviewers. Each of the reviewers either approves or disapproves a question that is shown to them. Their decisions lead to eventual acceptance or rejection of the question in the manner described below. $$\newline$$ If a question is created by an SME, it is reviewed first by Amal, and then by Bimal. If both of them approve the question, then the question is accepted and is not reviewed by Komal. If both disapprove the question, it is rejected and is not reviewed by Komal. If one of them approves the question and the other disapproves it, then the question is reviewed by Komal. Then the question is accepted only if she approves it. $$\newline$$ A question created by one of the reviewers is decided upon by the other two. If a question is created by Amal, then it is first reviewed by Bimal. If Bimal approves the question, then it is accepted. Otherwise, it is reviewed by Komal. The question is then accepted only if Komal approves it. A similar process is followed for questions created by Bimal, whose questions are first reviewed by Komal, and then by Amal only if Komal disapproves it. Questions created by Komal are first reviewed by Amal, and then, if required, by Bimal. $$\newline$$ The following facts are also known. $$\newline$$ <ol> $\newline$ <li>Q02, Q06, Q09, Q11, and Q12 were rejected and the other questions were accepted.</li> $$\newline$$ <li>Amal reviewed only Q02, Q03, Q04, Q06, Q08, Q10, Q11, and Q13.</li> $$\newline$$ <li>Bimal reviewed only Q02, Q04, Q06 through Q09, Q12, and Q13.</li> $$\newline$$ <li>Komal reviewed only Q01 through Q05, Q07, Q08, Q09, Q11, and Q12.</li> $\newline$ </ol>

Three reviewers Amal, Bimal, and Komal are tasked with selecting questions from a pool of 13 questions (Q01 to Q13). Questions can be created by external "subject matter experts" (SMEs) or by one of the three reviewers. Each of the reviewers either approves or disapproves a question that is shown to them. Their decisions lead to eventual acceptance or rejection of the question in the manner described below. $$\newline$$ If a question is created by an SME, it is reviewed first by Amal, and then by Bimal. If both of them approve the question, then the question is accepted and is not reviewed by Komal. If both disapprove the question, it is rejected and is not reviewed by Komal. If one of them approves the question and the other disapproves it, then the question is reviewed by Komal. Then the question is accepted only if she approves it. $$\newline$$ A question created by one of the reviewers is decided upon by the other two. If a question is created by Amal, then it is first reviewed by Bimal. If Bimal approves the question, then it is accepted. Otherwise, it is reviewed by Komal. The question is then accepted only if Komal approves it. A similar process is followed for questions created by Bimal, whose questions are first reviewed by Komal, and then by Amal only if Komal disapproves it. Questions created by Komal are first reviewed by Amal, and then, if required, by Bimal. $$\newline$$ The following facts are also known. $$\newline$$ <ol> $\newline$ <li>Q02, Q06, Q09, Q11, and Q12 were rejected and the other questions were accepted.</li> $$\newline$$ <li>Amal reviewed only Q02, Q03, Q04, Q06, Q08, Q10, Q11, and Q13.</li> $$\newline$$ <li>Bimal reviewed only Q02, Q04, Q06 through Q09, Q12, and Q13.</li> $$\newline$$ <li>Komal reviewed only Q01 through Q05, Q07, Q08, Q09, Q11, and Q12.</li> $\newline$ </ol>

<img src="https://balti.aftergrad.in/questions/12J2HNXfQ3Y1S79" width="600px"/> The figure above shows the schedule of four employees – Abani, Bahni, Danni and Tinni –whom Dhoni supervised in 2020. Altogether there were five projects which started and concluded in 2020 in which they were involved. For each of these projects and for each employee, the starting day was at the beginning of a month and the concluding day was the end of a month, and these are indicated by the left and right end points of the corresponding horizontal bars. The number within each bar indicates the percentage of assigned work completed by the employee for that project, as assessed by Dhoni. For each employee, his/her total project-month (in 2020) is the sum of the number of months(s)he worked across the five project, while his/her annual completion index is the weight age average of the completion percentage assigned from the different projects, with the weights being the corresponding number of months she worked in these projects. For each project, the total employee-month is the sum of the number of months four employees worked in this project, while its completion index is the weight age average of the completion percentage assigned for the employees who worked in this project, with the weights being the corresponding number of months they worked in this project.

<img src="https://balti.aftergrad.in/questions/12J2HNXfQ3Y1S79" width="600px"/> The figure above shows the schedule of four employees – Abani, Bahni, Danni and Tinni –whom Dhoni supervised in 2020. Altogether there were five projects which started and concluded in 2020 in which they were involved. For each of these projects and for each employee, the starting day was at the beginning of a month and the concluding day was the end of a month, and these are indicated by the left and right end points of the corresponding horizontal bars. The number within each bar indicates the percentage of assigned work completed by the employee for that project, as assessed by Dhoni. For each employee, his/her total project-month (in 2020) is the sum of the number of months(s)he worked across the five project, while his/her annual completion index is the weight age average of the completion percentage assigned from the different projects, with the weights being the corresponding number of months she worked in these projects. For each project, the total employee-month is the sum of the number of months four employees worked in this project, while its completion index is the weight age average of the completion percentage assigned for the employees who worked in this project, with the weights being the corresponding number of months they worked in this project.

<img src="https://balti.aftergrad.in/questions/12J2HNXfQ3Y1S79" width="600px"/> The figure above shows the schedule of four employees – Abani, Bahni, Danni and Tinni –whom Dhoni supervised in 2020. Altogether there were five projects which started and concluded in 2020 in which they were involved. For each of these projects and for each employee, the starting day was at the beginning of a month and the concluding day was the end of a month, and these are indicated by the left and right end points of the corresponding horizontal bars. The number within each bar indicates the percentage of assigned work completed by the employee for that project, as assessed by Dhoni. For each employee, his/her total project-month (in 2020) is the sum of the number of months(s)he worked across the five project, while his/her annual completion index is the weight age average of the completion percentage assigned from the different projects, with the weights being the corresponding number of months she worked in these projects. For each project, the total employee-month is the sum of the number of months four employees worked in this project, while its completion index is the weight age average of the completion percentage assigned for the employees who worked in this project, with the weights being the corresponding number of months they worked in this project.

<img src="https://balti.aftergrad.in/questions/12J2HNXfQ3Y1S79" width="600px"/> The figure above shows the schedule of four employees – Abani, Bahni, Danni and Tinni –whom Dhoni supervised in 2020. Altogether there were five projects which started and concluded in 2020 in which they were involved. For each of these projects and for each employee, the starting day was at the beginning of a month and the concluding day was the end of a month, and these are indicated by the left and right end points of the corresponding horizontal bars. The number within each bar indicates the percentage of assigned work completed by the employee for that project, as assessed by Dhoni. For each employee, his/her total project-month (in 2020) is the sum of the number of months(s)he worked across the five project, while his/her annual completion index is the weight age average of the completion percentage assigned from the different projects, with the weights being the corresponding number of months she worked in these projects. For each project, the total employee-month is the sum of the number of months four employees worked in this project, while its completion index is the weight age average of the completion percentage assigned for the employees who worked in this project, with the weights being the corresponding number of months they worked in this project.

Each of the bottles mentioned in this question contains 50 ml of liquid. The liquid in any bottle can be 100% pure content (P) or can have certain amount of impurity (I). Visually it is not possible to distinguish between P and I. There is a testing device which detects impurity, as long as the percentage of impurity in the content tested is 10% or more. $$\newline$$ For example, suppose bottle 1 contains only P, and bottle 2 contains 80% P and 20% I. If content from bottle 1 is tested, it will be found out that it contains only P. If content of bottle 2is tested, the test will reveal that it contains some amount of I. If 10 ml of content from bottle 1is mixed with 20 ml content from bottle 2, the test will show that the mixture has impurity, and hence we can conclude that at least one of the two bottles has I. However, if 10 ml of content from bottle 1 is mixed with 5 ml of content from bottle 2. the test will not detect any impurity in the resultant mixture.

Each of the bottles mentioned in this question contains 50 ml of liquid. The liquid in any bottle can be 100% pure content (P) or can have certain amount of impurity (I). Visually it is not possible to distinguish between P and I. There is a testing device which detects impurity, as long as the percentage of impurity in the content tested is 10% or more. $$\newline$$ For example, suppose bottle 1 contains only P, and bottle 2 contains 80% P and 20% I. If content from bottle 1 is tested, it will be found out that it contains only P. If content of bottle 2is tested, the test will reveal that it contains some amount of I. If 10 ml of content from bottle 1is mixed with 20 ml content from bottle 2, the test will show that the mixture has impurity, and hence we can conclude that at least one of the two bottles has I. However, if 10 ml of content from bottle 1 is mixed with 5 ml of content from bottle 2. the test will not detect any impurity in the resultant mixture.

Each of the bottles mentioned in this question contains 50 ml of liquid. The liquid in any bottle can be 100% pure content (P) or can have certain amount of impurity (I). Visually it is not possible to distinguish between P and I. There is a testing device which detects impurity, as long as the percentage of impurity in the content tested is 10% or more. $$\newline$$ For example, suppose bottle 1 contains only P, and bottle 2 contains 80% P and 20% I. If content from bottle 1 is tested, it will be found out that it contains only P. If content of bottle 2is tested, the test will reveal that it contains some amount of I. If 10 ml of content from bottle 1is mixed with 20 ml content from bottle 2, the test will show that the mixture has impurity, and hence we can conclude that at least one of the two bottles has I. However, if 10 ml of content from bottle 1 is mixed with 5 ml of content from bottle 2. the test will not detect any impurity in the resultant mixture.

Each of the bottles mentioned in this question contains 50 ml of liquid. The liquid in any bottle can be 100% pure content (P) or can have certain amount of impurity (I). Visually it is not possible to distinguish between P and I. There is a testing device which detects impurity, as long as the percentage of impurity in the content tested is 10% or more. $$\newline$$ For example, suppose bottle 1 contains only P, and bottle 2 contains 80% P and 20% I. If content from bottle 1 is tested, it will be found out that it contains only P. If content of bottle 2is tested, the test will reveal that it contains some amount of I. If 10 ml of content from bottle 1is mixed with 20 ml content from bottle 2, the test will show that the mixture has impurity, and hence we can conclude that at least one of the two bottles has I. However, if 10 ml of content from bottle 1 is mixed with 5 ml of content from bottle 2. the test will not detect any impurity in the resultant mixture.